Prof. Dr. Bernhard Peters
|
|
||||||
| Fakultät oder Zentrum | Fakultät für Naturwissenschaften, Technologie und Medizin | ||||||
| Department | Fachbereich Ingenieurwissenschaften | ||||||
| Postadresse |
Campus Kirchberg, Université du Luxembourg 6, rue Richard Coudenhove-Kalergi L-1359 Luxembourg |
||||||
| Büroadresse | A09 | ||||||
|
|||||||
| Telefon | (+352) 46 66 44 5496 | ||||||
2007 Professor of Thermo- and Fluiddynamics at University of Luxembourg
2001-2007 Project leader and design engineer at AVL List GmbH, Graz, Austria
1993-2001 Group leader of thermal conversion section at the Research Centre Karlsruhe, Germany
1990-1993 Post-doc and senior research assistant at Imperial College of Science, Technology and Medicine,University of London, England
1990 PhD-thesis at Technical University of Aachen, Germany
Current areas of research:
- CFD including thermal conversion and heat/mass transfer in packed and moving beds of granular matter
- Granular matter and transport
- Thermal decomposition of biomass
- Object-oriented software development and high performance computing
Last updated on: Dienstag, den 28. Februar 2012
All research activities and more are to be discovered at: http://dpm.gforge.uni.lu/
Last updated on: 15 Dez 2011
2023
Investigation of OpenFOAM-XDEM momentum coupling results for AWJC Nozzle using preCICE; ;
Scientific Conference (2023, February 14)
Three-dimensional CFD-DEM simulation of raceway transport phenomena in a blast furnace; ; ; ; ; ;
in Fuel (2023), 334(2),
Reconstruct the biomass particles fields in the particle-fluid problem using continuum methods by applying the physics-informed neural network;
in Results in Engineering (2023), 17
Developing the AM G-code based thermomechanical finite element platform for the analysis of thermal deformation and stress in metal additive manufacturing process; ; ; ;
in Journal of Mechanical Science and Technology (2023)
2022
HEAT AND MASS TRANSFER BETWEEN XDEM & OPENFOAM USING PRECICE COUPLING LIBRARY; ; ; ;
Scientific Conference (2022, June 09)
XDEM study of burden distribution in iron ore pellet firing; ; ;
in Ironmaking and Steelmaking (2022), 49(6), 615-625
Developing a DEM-Coupled OpenFOAM solver for multiphysics simulation of additive manufacturing process; ;
in Scipedia.com (2022, December)
CFD-DEM simulation of melt pool formation and evolution in powder bed fusion process; ;
Poster (2022, May 31)
Development of an HPC Multi-Physics Biomass Furnace Simulation and Integration in a Cloud-based Workflow; ;
Scientific Conference (2022, June 09)
Parallel Multi-Physics Simulation of Biomass Furnace and Cloud-based Workflow for SMEs; ;
in Practice and Experience in Advanced Research Computing (PEARC '22) (2022, July)
Prediction of the biomass particles through the physics informed neural network.; ;
in ECCOMAS Congress 2022 - 8th European Congress on Computational Methods in Applied Sciences and Engineering (2022)
On the Reduction of Computational Costs for Tungsten Powder Bed Processes; ; ;
Scientific Conference (2022, May 31)
Local Verlet buffer approach for broad-phase interaction detection in Discrete Element Method; ; ; ;
E-print/Working paper (2022)
MATERIAL MODELLING AND FINITE ELEMENT ANALYSIS IN METAL ADDITIVE MANUFACTURING; ; ; ;
Poster (2022, May 31)
THE EVOLUTION OF THERMAL DISTORTION AND STRESSES AT MACRO SCALE FOR METAL ADDITIVELY MANUFACTURED PART; ; ; ;
Scientific Conference (2022, February 05)
Analysis of Coke Particle Gasification in the Raceway of a Blast Furnace; ;
in IFAC-PapersOnLine (2022), 55(20), 277-282
An Innovative Partitioning Technology for Coupled Software Modules; ; ; ;
in Proceedings of the 12th International Conference on Simulation and Modeling Methodologies, Technologies and Applications - SIMULTECH (2022, July)
2021
AWJC Nozzle simulation by 6-way coupling of DEM+CFD+FEM using preCICE coupling library; ; ;
Scientific Conference (2021, June 16)
Evaluation of erosion inside AWJC Nozzle by 6-way coupling of DEM+CFD+FEM using preCICE; ; ;
Presentation (2021, February 23)
Mathematical modeling of thermal behavior of single iron ore pellet during heat hardening oxidation; ; ; ;
in Journal of Thermal Analysis and Calorimetry (2021)
Eulerian-Lagrangian momentum coupling between XDEM and OpenFOAM using preCICE; ; ;
in 14th WCCM & ECCOMAS Congress 2020 (2021, January)
A Discrete Element Framework for Modeling the Mechanical Behaviour of Snow PART I: Mechanical Behaviour and Numerical Model; ; ;
in Granular Matter (2021), 23(2), 42
Thermo-mechanical modelling for metal additive manufacturing; ; ; ;
Scientific Conference (2021, October 27)
Thermo-mechanical coupling and part-level analysis for additive manufacturing processes; ; ;
Scientific Conference (2021, January 13)
A Discrete Element Framework for Modeling the Mechanical Behaviour of Snow PART II: Model Validation; ; ;
in Granular Matter (2021), 23(2), 43
Analysis of a blast furnace behaviour through a resolving euler-lagrange approach; ;
Scientific Conference (2021, October)
2020
Parallel coupling strategy for multi-physics applications in eXtended Discrete Element Method; ; ;
Scientific Conference (2020, June 18)
HPC Multi-physics Biomass Furnace simulations as a Service; ; ; ; ; ;
Scientific Conference (2020, November)
ROS networks: designs, aging, Parkinson's disease and precision therapies.; ; ; ; ; ; ; ; ; ; ; ; ; ; ;
in NPJ Systems Biology and Applications (2020)
Fatigue phase-field damage modeling of rubber using viscous dissipation: Crack nucleation and propagation; ;
in Mechanics of Materials (2020), 142
Accelerating fatigue simulations of a phase-field damage model for rubber; ; ;
in Computer Methods in Applied Mechanics and Engineering (2020), 370(113247),
Predicting near-optimal skin distance in Verlet buffer approach for Discrete Element Method; ; ; ;
in 10th IEEE Workshop on Parallel / Distributed Combinatorics and Optimization (2020, June)
Detailed Numerical Three-dimensional and Transient Analysis of a Grate Firing Combustion Process by Innovative High Performance Computing; ; ; ; ; ;
Scientific Conference (2020, April 27)
Process analysis in thermal process engineering with high-performance computing using the example of grate firing; ; ; ; ; ; ;
in Scherer, Viktor; Fricker, Neil; Reis, Albino (Eds.) Proceedings of the 12th European Conference on Industrial Furnaces and Boilers (2020, November)
DEM simulation of dense granular flows in a vane shear cell: Kinematics and rheological laws; ; ;
in Powder Technology (2020)
Numerical Analysis of Interaction between a Reacting Fluid and a Moving Bed with Spatially and Temporally Fluctuating Porosity; ; ; ;
Scientific Conference (2020, August 31)
Lowering the obstacles for SMEs to adopt multi-physics biomass furnace simulations by providing a cloud based solution; ; ; ; ; ;
Scientific Conference (2020, October 14)
2019
Co-located Partitioning Strategy and Dual-grid Multiscale Approach for Parallel Coupling of CFD-DEM Simulations; ; ; ;
Scientific Conference (2019, June 05)
Identification of optimal process parameters in selective laser sintering; ; ;
Scientific Conference (2019)
Phase field fracture model for viscoplastic materials in large deformations; ;
Scientific Conference (2019, June 13)
Micromechanical model for sintering and damage in viscoelastic porous ice and snow. Part I: Model and calibration;
in International Journal of Solids and Structures (2019)
Micromechanical model for sintering and damage in viscoelastic porous ice and snow. Part II: validation;
in International Journal of Solids and Structures (2019)
Integrated micromechanical model for slope stability analysis;
Scientific Conference (2019, April 09)
Simulation-based Optimisation Of Selective Laser Sintering/Melting Process;
in Euro PM2019 Congress Proceedings (2019)
Rate-dependent phase-field damage modeling of rubber and its experimental parameter identification; ;
in Journal of the Mechanics and Physics of Solids (2019)
Verlet buffer for broad-phase interaction detection in Discrete Element Method; ; ; ;
Scientific Conference (2019, July 26)
The XDEM Multi-physics and Multi-scale Simulation Technology: Review on DEM-CFD Coupling, Methodology and Engineering Applications; ; ; ; ; ;
in Particuology (2019), 44
A parallel dual-grid multiscale approach to CFD-DEM couplings; ; ; ;
in Journal of Computational Physics (2019), 378
Comparison of boundary treatments in thermal Lattice Boltzmann simulations of moving particles in fluids; ; ; ;
in Particle Technology Series (2019, April 09)
Comparison of numerical schemes for 3D Lattice Boltzmann simulations of moving rigid particles in thermal fluid flows; ; ;
in Powder Technology (2019), 356(3), 528-546
A forcing fictitious domain/immersed boundary method for super-quadric shape of particulate flow simulation of cementitious material; ;
in International Centre for NumericalMethods in Engineering (2019)
A Forcing Fictitious Domain Method to Simulate Fluid-particle Interaction of Particles with Super-quadric Shape; ; ;
in Powder Technology (2019), 360(15/January 2020), 264-277
An interface resolved immersed boundary method in XDEM for particulate flow simulations; ; ;
in International Congress on Particle Technology (2019, April 09)
2018
Hydrodynamic Analysis of Gas-Liquid-Liquid-Solid Reactors using the XDEM Numerical Approach; ; ;
in Canadian Journal of Chemical Engineering (2018)
Softening and melting modeling of iron ore particles using a discrete - continuous coupling method; ;
Scientific Conference (2018, June 13)
Application of eXtedned Discrete Element Method to the melting process of a packed of particles; ; ;
Scientific Conference (2018, April 25)
SOFTENING AND MELTING MODELING OF IRON ORE PARTICLES USING A CFD-DEM COUPLING METHOD;
Scientific Conference (2018, September 25)
Experimental and numerical investigation into the softening Behavior of a packed bed of iron ore pellets;
in Powder Technology (2018), 339
A Discrete-Continuous Method for Predicting Thermochemical Phenomena in a Cement Kiln and Supporting Indirect Monitoring; ;
in Engineering Journal (2018), 22(6), 165-183
A comparison between discrete analysis and a multiphase approach for predicting heat conduction in packed beds; ;
in Proceedings of the 10th International Conference on Computer Modeling and Simulation (2018)
Comparison of Several RANS Modelling for the Pavia TRIGA Mark II Research Reactor; ; ; ;
in Journal of Nuclear Engineering and Radiation Science (2018)
Development of a Data-Driven Approach based on Kalman filtering for CFD Reactor Analysis; ; ; ;
in PHYSOR 2018 (2018)
Micromechanical model for sintering and damage in viscoelastic porous ice and snow. Part I: Theory;
E-print/Working paper (2018)
Bonded Particle Model for Numerical Analysis of Concrete Fracture under Impact Loading;
Scientific Conference (2018, July 04)
Verlet buffer for broad phase interaction detection in Discrete Element Method; ; ;
Poster (2018, September 24)
Hybrid MPI+OpenMP Implementation of eXtended Discrete Element Method; ; ; ;
in Proc. of the 9th Workshop on Applications for Multi-Core Architectures (WAMCA'18), part of 30th Intl. Symp. on Computer Architecture and High Performance Computing (SBAC-PAD 2018) (2018, September)
The Extented Discrete Element Method (XDEM): An Advanced Approach to Model Blast Furnace; ;
in Iron Ores and Iron Oxide Materials (2018)
On the performance of an overlapping-domain parallelization strategy for Eulerian-Lagrangian Multiphysics software; ; ; ;
in AIP Conference Proceedings of 15th International Conference of Numerical Analysis and Applied Mathematics (ICNAAM) (2018, July 10)
A co-located partitions strategy for parallel CFD-DEM couplings; ; ;
in Advanced Powder Technology (2018)
A Parallel Multiscale DEM-VOF Method For Large-Scale Simulations Of Three-Phase Flows; ; ;
in Proceedings of ECCM-ECFD 2018 (2018)
A Multiscale DEM-VOF Method for the simulation of three-phase flows;
in International Journal of Multiphase Flow (2018), 99
A Numerical approach for the evaluation of particle-induced erosion in an Abrasive Waterjet focusing tube;
in Powder Technology (2018)
Comparing Broad-Phase Interaction Detection Algorithms for Multiphysics DEM Applications; ; ; ; ;
in AIP Conference Proceedings of 15th International Conference of Numerical Analysis and Applied Mathematics (ICNAAM) (2018, July 10)
2017
Resolving Multiphase Flow through Packed Bed of Solid Particles Using eXtended Discrete Element Method with Porosity Calculation;
in Industrial and Engineering Chemistry (2017)
Preliminary investigation on the capability of eXtended Discrete Element method for treating the dripping zone of a blast furnace;
in ISIJ International (2017), 58(1),
Investigating Multiphase flow Behavior in Trickle Bed Reactors using eXtended Discrete Element Method (XDEM);
Scientific Conference (2017, May 08)
Model Study of Multiphase Flow Through Packed Particles by eXtended Discrete Element Method (XDEM); ;
Scientific Conference (2017, June 20)
Coupled CFD-DEM with Heat and Mass transfer to Investigate the Melting of a Granular Packed Bed; ;
in Chemical Engineering Science (2017)
A CFD–DEM approach coupled with heat transfer for the melting process of a packed of particles; ;
Scientific Conference (2017, September 28)
Multiscale model of sintering: diffusion and plastic flow;
Scientific Conference (2017, September 27)
Conversion analysis of a cylindrical biomass particle with a DEM-CFD coupling approach; ;
in Case Studies in Thermal Engineering (2017), 10
Flow characteristics of metallic powder grains for additive manufacturing;
in EPJ Web of Conferences (2017), 13001
Numericl Analysis of the Fluiddynamic Interaction between Carrier Gas and Powder; ;
Scientific Conference (2017, October 11)
Multiscale-multiphysics approaches for engineering applications;
in AIP Conference Proceedings (2017), 1863(1), 180001
On the choice of a phase interchange strategy for a multiscale DEM-VOF Method;
in AIP Conference Proceedings (2017), 1863
LES-VOF SIMULATIONS OF A PURE WATER JET DEVELOPING INSIDE AN AWJC NOZZLE: PRELIMINARY OBSERVATIONS AND GUIDELINES;
in Proceedings of 2017 WJTA-IMCA (2017)
Evaluating Erosion Patterns in an abrasive water jet cutting nozzle using XDEM;
in Advances in Powder Metallurgy & Particulate Materials (2017)
Parallelizing XDEM: Load-balancing policies and efficiency, a study; ;
Scientific Conference (2017, September)
Dynamic Sintering of a High Temperature Granular Material: Experiments and Simulations; ; ; ;
Scientific Conference (2017, September 26)
2016
CFD-XDEM FOR PREDICTING MULTIPHASE FLOW BEHAVIOR THROUGH POROUS MEDIA;
Scientific Conference (2016, June 05)
Application of the extended discrete element method (XDEM) in the melting of a single particle; ;
in Baniasadi, Mehdi (Ed.) Application of the extended discrete element method (XDEM) in the melting of a single particle (2016, July 19)
XDEM for Tuning Lumped Models of Thermochemical Processes Involving Materials in the Powder State; ; ; ; ;
in Engineering Journal (2016), 20(5), 187-201
HPC or the Cloud: a cost study over an XDEM Simulation; ; ; ;
in Proc. of the 7th International Supercomputing Conference in Mexico (ISUM 2016) (2016)
Modeling of the biomass combustion on a forward acting grate using XDEM; ; ; ;
in Chemical Engineering Science (2016), 142
Numerical study of the influence of particle size and packing on pyrolysis products using XDEM; ; ;
in International Communications in Heat and Mass Transfer (2016), 71
A Combined Experimental and Numerical Approach to a Discrete Description of Indirect Reduction of Iron Oxide; ; ; ; ;
in LA METALLURGIA ITALIANA (2016), (3), 49-54
Berechnung des Transportes von Treibgut bei Hochwasser; ;
in 39. DRESDNER WASSERBAUKOLLOQUIUM (2016)
ON THE INFLUENCE OF DIFFERENT MAPPING TECHNIQUES FOR A MULTISCALE APPROACH TO TURBULENT THREE-PHASE FLOWS;
Scientific Conference (2016, June 06)
2015
Performance Evaluation of the XDEM framework on the OpenStack Cloud Computing Middleware; ; ; ; ;
in Proceedings of the Fourth International Conference on Parallel, Distributed, Grid and Cloud Computing for Engineering (2015, February)
A discrete-continuous approach to describe CaCO3 decarbonation in non-steady thermal conditions; ; ; ; ;
in Powder Technology (2015), 275
Predicting Tungsten Oxide Reduction with the Extended Discrete Element Method;
in Advances in Powder Metallurgy & Particulate Materials (2015), (Proceedings of the 2015 International Conference on Powder Metallurgy Particulate Materials), 0235--0248
A discrete-continuous approach to describe CaCO3 decarbonation in non-steady thermal conditions; ; ; ; ;
in Powder Technology (2015), 275
Multiskalenmodellierung für technische Anwendungenin ECEMP 2015, European Centre for Emerging Materials and Processes (2015)
The Extended Discrete Element Method (XDEM) as a Flexible and Advanced Tool in Multi-physics Applicationsin 26th International Symposium on Transport Phenomena (2015)
A discrete/continuous numerical approach to multi-physics; ; ; ;
in IFAC-PapersOnLine (2015), 28(1), 645-650
A Combined Experimental and Numerical Approach to a Discrete Description of Indirect Reduction of Iron Oxide; ; ; ; ;
in SteelSim 2015, MODELLING and SIMULATION of METALLURGICAL PROCESSES in STEELMAKING (2015)
Experimental and numerical investigation into iron ore reduction in packed beds; ; ; ; ;
in Chemical Engineering Science (2015)
A Discrete Approach to Describe the Elastic-plastic Behaviour of Snow; ;
in Fourth Conference on Particle-Based Methods (PARTICLES 2015) (2015)
Assessing Heat Transfer Through Walls Of Packed Bed Reactors By An Innovative Particle-Resolved Approach; ; ; ; ;
in 18th IFRF Member's Conference (2015)
2014
eXtended Discrete Element Method used for predicting tungsten-oxide reduction in a dry-hydrogen atmosphere;
in LLanes, Luis (Ed.) eXtended Discrete Element Method used for predicting tungsten-oxide reduction in a dry-hydrogen atmosphere (2014, March 10)
XDEM employed to predict reduction of tungsten oxide in a dry hydrogen atmosphere;
in International Journal of Refractory Metals and Hard Materials (2014)
Comparison of ODE-based models for reactive oxygen species regulation system; ; ;
in Proceedings of ICCSA 2014 (2014, June)
ROS-activated signaling network: dynamic modelling and design principles study; ; ; ; ; ; ; ; ;
Poster (2014, June)
ROS homeostasis in a dynamic model: How to save PD neuron?; ; ; ; ; ; ; ; ; ; ; ;
Poster (2014, December)
Detailed numerical modeling of pyrolysis in a heterogeneous packed bed using XDEM; ;
in Journal of Analytical and Applied Pyrolysis (2014), 106
Application of XDEM as a novel approach to predict drying of a packed bed; ;
in International Journal of Thermal Sciences (2014), 75
XDEM - FEM Coupling Simulations of the Interactions between a Tire Tread and Granular Terrain; ;
E-print/Working paper (2014)
Scale-Resolved Prediction of Pyrolysis in a Packed Bed by the Extended Discrete Element Method (XDEM); ; ; ; ;
in The Ninth International Conference on Engineering Computational Technology (2014)
An Integral Approach to Multi-physics Application for Packed Bed Reactors; ; ; ; ; ;
in 24th European Symposium on Computer Aided Process Engineering, ESCAPE 24 (2014)
The extended discrete element method (XDEM) applied to drying of a packed bed; ; ; ; ;
in Industrial Combustion (2014), 14
Beschreibung des Transportes von Schwimmkörpern bei Flutwasser über eine Euler-Lagrange Kopplung; ; ; ; ; ;
in Dresdner Wasserbauliche Mitteilungen (2014)
Experimental and Numerical Evaluation of the Residence Time Characteristics on a Forward Acting Grate; ;
in Condensed Matter 2014 (2014)
Transport Characteristics of Granular Matter on a Forward Acting Grate;
in COST Action MP1305 Flowing Matter (2014)
2013
Unified Design for Parallel Execution of Coupled Simulations using the Discrete Particle Method; ; ;
in Proceedings of the Third International Conference on Parallel, Distributed, Grid and Cloud Computing for Engineering (2013)
eXtended Discrete Element Method used for convective heat transfer predictions; ;
in International Review of Mechanical Engineering (2013), 7(2), 329-336
Extended Discrete Element Method (XDEM) to Model Heterogeneous Reactions in Packed Beds;
in PARTEC - International Congress on Particle Technology (2013, April)
Design principles study of ROS management and ROS-induced mitophagy with a kinetic model; ; ; ; ; ; ;
Poster (2013, September 27)
ROS-induced regulation of mitophagy and its failure in Parkinson’s disease; ; ; ; ; ; ; ;
Poster (2013, May)
Discrete Element Modeling of Inter-Granular Bonds between Snow Grains; ;
in PARTEC - International Congress on Particle Technology (2013, April)
3D DEM – FEM Coupling to Analyse the Tractive Performance of Different Tire Treads in Soil;
in Idelsohn, S; Papadrakakis, M; Schrefler, B (Eds.) Computational Methods for Coupled Problems in Science and Engineering V (2013, June)
An Efficient 3D FEM - DEM Coupling for Granular Matter Applications; ;
in Coupled MBS-FE Applications: A New Trend in Simulation (2013, November)
Simulation des Traktionsverhaltens von Reifen auf granularem Untergrund durch eine Kopplung zwischen der Finiten (FEM) und der Diskreten Element Methode (DEM); ;
in VDI-Berichte "Reifen-Fahrwerk-Fahrbahn" (2013, October)
The extended discrete element method (XDEM) for multi-physics applicationsin Scholarly Journal of Engineering Research (2013), 2
Simulation von reagierenden Mehrphasen- strömungen mit der Extended Discrete Element Method (XDEM)Scientific Conference (2013)
The extended discrete element method (XDEM) for multi-physics applicationsin Scholarly Journal of Engineering Research (2013)
The Extended Discrete Element Method (XDEM) for Multi-Physics ApplicationsScientific Conference (2013)
Die Extended Discrete Element Method (XDEM) als integraler Ansatz für reagierende Mehrphasenströmungen;
in 26. Deutscher Flammentag Verbrennung und Feuerung (2013, September)
Enhanced Thermal Process Engineering by the Extended Discrete Element Method (XDEM); ; ; ; ;
in Universal Journal of Engineering Science (2013), 1
Application of the Extended Discrete Element Method (XDEM) in Computer-Aided Process Engineering; ; ; ; ;
Scientific Conference (2013)
Die Extended Discrete Element Method (XDEM) für multiphysikalische Anwendungen; ; ; ; ; ; ;
Scientific Conference (2013)
The Extended Discrete Element Method (XDEM) for Multi-Physics Applications; ; ; ; ;
in Finnish-Swedish Flame Days 2013 (2013, April 18)
Die Extended Discrete Element Method (XDEM) als integraler Ansatz für reagierende Mehrphasenströmungen;
in 26. Deutscher Flammentag Verbrennung und Feuerung (2013)
Numerical prediction of the bulk density of granular particles of di erent geometries; ;
in KONA Powder and Particle Journal (2013)
A Numerical Approach to Predict Sulphur Dioxide Emissions During Switchgrass Combustion;
in Chemical and Process Engineering (2013)
Experimental and numerical investigation into the residence time distribution of granular particles on forward and reverse acting grate;
in Chemical Engineering Science (2013)
Assessment of the potentials of implicit integration method in discrete element modelling of granular matter; ; ;
in Computers and Chemical Engineering (2013)
2012
Resolution of Different Length Scales by an Efficient Combination of the Finite Element Method and the Discrete Element Method; ;
in Topping, B.H.V. (Ed.) Proceedings of the Eleventh International Conference on Computational Structures Technology (2012)
Heat transfer in Fixed and Moving Packed Beds Predicted by the Extended Discrete Element Method;
in Advances in Industrial Heat Transfer (2012)
Developing a fast photochemical calculator for an integrated assessment model; ; ;
in International Journal of Environment and Pollution (2012)
2011
An Integrated Approach to Model Blast Furnaces;
in Proceedins: METEC InSteelCON 2011, Düsseldorf, Germany, CCD Congress Center Düsseldorf, 27th June - 1st July, 2011 (2011)
Application of a detailed reaction mechanism to pyrolysis of miscanthus giganteusin Journal of Analytical and Applied Pyrolysis (2011)
Prediction of pyrolysis of pistachio shells based on its components hemicellulose, cellulose and ligninin Fuel Processing Technology (2011)
Prediction of Conversion of a Packed Bed of Fuel Particles on a Forward Acting;
in Computer Aided Chemical Engineering (2011)
Simulation of Thermal Conversion of Solid Fuel By The Discrete Particle Method; ;
in Lithuanian Journal of Physics (2011)
Evaluation of potassium chloride emissions applying the Discrete Particle Method (DPM);
in Computers and Chemical Engineering (2011)
Evaluation of potassium chlorine emissions applying the Discrete Particle Method (DPM);
in Energy and Fuels (2011)
Trade-offs between energy cost and health impact in a regional coupled energy–air quality model: the LEAQ model; ; ; ;
in Environmental Research Letters (2011)
2010
A discrete approach to thermal conversion of solid fuel by the discrete particle method (dpm); ;
in Abstract book of 10th International Conference Modern Building Materials, Structures and Techniques (2010)
Approach To Predict Emission of Sulfur Dioxide during Switchgrass Combustion Employing the Discrete Particle Method (DPM);
in Energy and Fuels (2010), 2(24), 945953
An implicit approach to predict the dynamics of granular media; ; ;
in Abstract book of 81st Annual Meeting of the International Association of Applied Mathematics and Mechanics (2010), 10(1), 55-56
2009
Selecting a fast air quality calculator for an optimization meta-model; ; ;
in Monitoring and Management of Air Pollution (2009)
Parallel implementation of domain decomposition algorithm for molecular dynamics; ; ;
in PARENG 2007 (2009)
2007
Experimental and numerical evaluation of the transport behaviour of moving bed on a forward acting grate; ; ;
in Granular Matter (2007), 9
2006
Evaluation of the residence time of a moving fuel bed on a forward acting grate.; ; ;
in Granular Matter (2006)
2005
An approach to qualify the intensity of mixing on a forward acting grate.; ; ;
in Chemical Engineering Science (2005), (60/6), 1649-1659
2004
Measurements and particle resolved modelling of the thermo-and fluid dynamics of a packed bed.; ;
in Journal of Analytical and Applied Pyrolysis (2004), (70), 211-233
Characterisation of muniipal solid waste combustion in a great furnace.; ; ;
in Waste Management (2004), 23(8)
Catalytic converters in a one-dimensional cycle simulation code considering three-dimensional behavior.;
in SAE International Journal of Fuels and Lubricants (2004)
2003
Characterization of Municipal Solid Waste Combustion in a Grate Furnacein Waste Management (2003), vol. 23/8
Numerical Simulation of a Diesel Particulate Filter during Loading and Regenerationin ASME Internal Combustion Engine Division (2003)
Drying and prolysis of wood particles: experiments and simulation.;
in Journal of Analytical and Applied Pyrolysis (2003), 70
2002
Measurements and Application of a Discrete Particle Model (DPM) to Simulate Combustion of a Packed Bed of Individual Fuel Particles.in Combustion and Flame (2002), 131
Measurements and particle resolved modelling of drying and pyrolysis of a packed bed.; ;
in Journal of Analytical and Applied Pyrolysis (2002)
Measurements and particle resolved modelling of heat-up and drying of a packed bed.; ; ;
in Biomass & Bioenergy (2002), 23 (4)
Numerical simulation of a motion of non-sherical granular material using object-orientated techniques.;
in Computer Methods in Applied Mechanics and Engineering (2002), 191
2001
A flexible and stable numerical method for the decomposition process of wood particles.;
in Chemosphere (2001), 42
An approach to simulate the motion of spherical and non-spherical fuel particles in combustions chambers.;
in Granular Matter (2001), 3
Bestimmung des Kontaktpunktes für die Bewegung von elliptischen granularen Medien.;
in ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik=Journal of Applied Mathematics & Mechanics (2001), suppl.4(0946-8463), 831-832
Numerical modelling of electrified particle layer formation on the surface of filtration fabric.;
in Environmental Engineering (2001), 4
A principle approach to model furnace processes for waste incineration.; ;
in Environ. Comb. Tech (2001), 2
2000
Simulación Numérica de la Combustión en Lecho Estacionarioin Ingenieria Quimica -Madrid- (2000), 366
1999
Classification of Combustion Regimes in a Packed Bed of Particles Based on the Relevant Time and Length Scalesin Combustion and Flame (1999), 116(1-2), 297-301
Numerical simulation of the motion and combustion of granular material.;
in Industrial Heat Engineering (1999), 21
1998
Experimente und Modellierung zur heterogenen und homogenen Verbrennung.;
in FZKA-Bericht (1998), 6084
1997
Application de la Conception Objet Orienté à la Modélisation de l'Incinération de Déchets Municipauxin Proceedings of Informatique pour l’Environnement ’97 (1997)
Zur Modellierung der thermo-und fluiddynamischen Vorgänge bei der Festbettverbrennung.; ;
in Kaleidoskop aus aktueller forschung und Entwicklung. (1997)
Undated
A mass conservative Kalman filter algorithm for thermo-computational fluid dynamics; ; ; ; ;
in Materials (n.d.)
| URL: https://wwwde.uni.lu/forschung/fstm/doe/mitglieder/bernhard_peters | Datum: Freitag, den 09. Juni 2023, 11:07 |